← Back to Water Quality & Filtration Problems

Chlorine or Chemical Taste in Water

A strong chlorine taste usually means elevated chemical dosing in the municipal supply. While safe, it affects taste, smell, and overall water quality.

What you’ll usually notice

You may notice: – a strong “swimming pool” smell – unpleasant taste in drinking water – dry skin after showering

What’s normally behind it

This usually happens when municipal treatment levels are increased or when domestic dosing systems are not calibrated correctly.

Why quick fixes don’t stick

Switching to bottled water avoids drinking the water but does not address the issue for bathing or general use.

How this is normally handled

Water Usage Monitoring & Metering

This service diagnoses the real cause and fixes the system properly, not just the symptom.

What actually fixes it

This problem is normally handled by installing activated carbon filtration at the point of entry to remove excess chlorine and chemicals.

What you can check yourself

You can check a few things yourself:
– smell freshly drawn water
– see if the smell persists or fades after standing

When to call someone in

If the taste or smell makes the water unpleasant to use, filtration should be installed to improve water quality.

Why does my borehole water look dirty or sandy?

Dirty or sandy borehole water usually indicates poor borehole development, pump placement issues, or the need for proper sediment and media filtration.

Why do filters block so quickly?

Filters blocking quickly is often due to incorrect filter selection, unexpected water quality issues, high sediment loads, or lack of staged pre-filtration.

Why is my water pressure low?

Low water pressure is usually caused by undersized pumps, incorrect pressure settings, pipe restrictions, or supply limitations from municipal, borehole, or tank-fed systems.

Why does my pump keep switching on and off?

Rapid pump cycling is typically caused by pressure tank issues, incorrect pressure switch settings, leaks, or pumps that are oversized for the system demand.

When should I call a water system professional?

You should call a professional when problems repeat, systems behave unpredictably, pumps fail regularly, or when you need clarity before making costly system changes.