← Back to Water Quality & Filtration Problems

AFM / Glass Media Not Performing

Glass media only works if it is properly backwashed. If the flow is too low, the media never lifts and stops filtering effectively.

What you’ll usually notice

You may notice: – water still appears cloudy – downstream filters clog quickly – poor filtration performance

What’s normally behind it

This usually happens when the filter is not operating correctly. Typical causes include: – insufficient backwash flow – incorrect pump sizing – poor filter setup

Why quick fixes don’t stick

Replacing media does not solve a backwash problem.

How this is normally handled

Water Usage Monitoring & Metering

This service diagnoses the real cause and fixes the system properly, not just the symptom.

What actually fixes it

This problem is normally handled by matching the pump flow to the filter’s cleaning requirements.

What you can check yourself

You can check a few things yourself:
– observe backwash water clarity
– check if flow rate is strong enough

When to call someone in

If filtered water is not clear, the filtration process needs to be corrected.

Why does my borehole water look dirty or sandy?

Dirty or sandy borehole water usually indicates poor borehole development, pump placement issues, or the need for proper sediment and media filtration.

Why do filters block so quickly?

Filters blocking quickly is often due to incorrect filter selection, unexpected water quality issues, high sediment loads, or lack of staged pre-filtration.

Why is my water pressure low?

Low water pressure is usually caused by undersized pumps, incorrect pressure settings, pipe restrictions, or supply limitations from municipal, borehole, or tank-fed systems.

Why does my pump keep switching on and off?

Rapid pump cycling is typically caused by pressure tank issues, incorrect pressure switch settings, leaks, or pumps that are oversized for the system demand.

When should I call a water system professional?

You should call a professional when problems repeat, systems behave unpredictably, pumps fail regularly, or when you need clarity before making costly system changes.